Forum Discussion

drbarryh's avatar
drbarryh
Icon for Occasional Contributor rankOccasional Contributor
2 days ago

Correct way to configure the RGMII input and output pins on a MAX10 FPGA

Greetings ALTERA Expetrs, I am using an ALTERA Triple Speed Ethernet IP core configured n MAC only mode, which talks to a MARVELL 88E1111 PHY. Actually for this example i am using an ALTERA MAX10 10...
Ethernet
general
FvM's avatar
FvM
Icon for Super Contributor rankSuper Contributor
1 day ago

Hi Barry,
not sure why you're instantiating dedicated DDR IO. TSE IP in RGMII mode already interfaces to DDR RX and TX data.


Regards
Frank