Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
15 years ago

problem using NetLogic AEL2005 in SGMII pass-through mode

Hi, I am using Altera TSE IP Core with fifoless, 1000BASE-X and use GXB transceiver configuration. I am using Stratix-IV development kit. In my design, I am sending data to an SFP module...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
13 years ago

I just configured the following registers of TSE

1) Command Config Register

2) PCS Device Ability Register

3) PCS IF Mode Register

4) PCS Control Register

For link detection, you can use led_link signal.

thanks

sawaak