Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
15 years ago

multiplexing input sources for TSE MAC transmit interface

Hi I have two transmitting modules while only one TSE MAC port. My intention is to multiplex the input to the MAC TX depending on some signal. Seems pretty straight forward but I am having issu...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
15 years ago

Hi Daixiwin,

Thanks for the reply..

I am not using SOPC builder, just plain HDL..

It is rx_ready and not tx_ready and therefore is supposed to go from the stream source to TSE

thanks

sawaak