Forum Discussion

PeterTs's avatar
PeterTs
Icon for New Contributor rankNew Contributor
2 years ago
Solved

JESD204B on Cyclone V SE

Hello, Is it possible to use the JESD204B IP on a Cyclone V SE device (as it doesn't have a transceiver block)? Can one of the supported I/O standards be used in place of GXB_Tx pins?
  • skbeh's avatar
    skbeh
    2 years ago

    Hi Peter

    Cyclone V SE device doesn't support JESD204B.

    JESD204B is an interface protocol that required transceiver channels, it won't works if the selected FPGA doesn't have transceiver channels.

    For Cyclone V family, need to choose GX or GT device to support JESD204B up to 5000 Mbps.


skbeh's avatar
skbeh
Icon for Contributor rankContributor
2 years ago

Hi Peter

Cyclone V SE device doesn't support JESD204B.

JESD204B is an interface protocol that required transceiver channels, it won't works if the selected FPGA doesn't have transceiver channels.

For Cyclone V family, need to choose GX or GT device to support JESD204B up to 5000 Mbps.


  • PeterTs's avatar
    PeterTs
    Icon for New Contributor rankNew Contributor
    2 years ago

    Thanks for your response - that makes sense.

    In that case I assume the SX device will also support JESD204B, as it has contains at least 6 high speed transceiver channels?

    We need the SoC and DSP capability as well as the transceivers.

    Regards,

    Peter