Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
9 years ago

Custom IP Simulation in ModelSim

Hi all, I have a Custom IP developed in VHDL and i am able to communicate with the NiosII Soft processor.But when i simulate the Nios II processor,the communication between the Nios II and the ...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
9 years ago

Usually, the slave write/read is controlled in the application code. You might want to check your code and see whether you have inserted the reads.