Forum Discussion

APPU_appu's avatar
APPU_appu
Icon for Occasional Contributor rankOccasional Contributor
4 years ago

arria 10 part number "10ax115s2f45i1sg" DDR4 issue

Hii @AdzimZM_Intel @@AdzimZM_Intel we are using arria 10 part number "10ax115s2f45i1sg" we are generated the DDR4 EMIF example and generated .sof with this example project, using ...
APPU_appu's avatar
APPU_appu
Icon for Occasional Contributor rankOccasional Contributor
4 years ago

@AdzimZM_Intel

Hii Adzim,

we refered that only and we created the project with that only we are getting the error like this " The production ID 0x00810014 of this SOF is not matched with this BTS GUI. Expected production ID is 0x0000ACC9 ". So i asked the question we want know calibration pass/fail and we want to run same .sof to run the BTS... is there any other solution for that

Thanks

Appu