Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
9 years ago

8E1111 PHY tx_clk and rx_clk

Hi, I have a custom board with altera Stratix 4 and 8E1111 PHY. i am trying to initiate the triple speed ethernet IP. a 25MHz crystal is connected with the PHY. i have used the Simple Socket...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
9 years ago

Hi,

I just figured out that in the config[4] of 8e1111 connected to ground. so i think PHY is getting initialized in RGMII mode. is that true?

Thanks

Vinay