Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
9 years ago

8E1111 PHY tx_clk and rx_clk

Hi, I have a custom board with altera Stratix 4 and 8E1111 PHY. i am trying to initiate the triple speed ethernet IP. a 25MHz crystal is connected with the PHY. i have used the Simple Socket...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
9 years ago

Thanks for the link.

if i am following this configurations, how can i verify the setting?

i want to initiate the MII interface. can i check the behavior by probing the tx_clk/rx_clk signals?