Forum Discussion

fhw72's avatar
fhw72
Icon for New Contributor rankNew Contributor
2 months ago

Using Clocklock+Clockboost on EPF10K100GC503-3DX with Quartus 9.0SP2. How?

Hi! I recently started experimenting with a dinosaur*: EPF10K100GC503-3DX *Yes... I know it's old but I got some and it's "just for show". ;-) In order to use this device I learned that I need to...
Programmable Logic Device
FvM's avatar
FvM
Icon for Super Contributor rankSuper Contributor
2 months ago

I compiled a minimal design for both chips in Max+plus II. At least -3 and -3DX *.hex files of identical designs have no differences.

 

  • fhw72's avatar
    fhw72
    Icon for New Contributor rankNew Contributor
    2 months ago

    That's great: At least I can use the -3DX parts with the toolchain I have (Quartus 9.0). :-)

    I also tried to enable Clocklock on the V10.23 I have here... but the MegaWizard plugin does not give me the
    option to choose on of the special features. Only arithmetic, gates and storage is available.
    Could it be that the -3DX features are only available with a special license?

    • FvM's avatar
      FvM
      Icon for Super Contributor rankSuper Contributor
      2 months ago

      Hi,
      I find the CLKLOCK symbol in mega_lpm library. Don't think you need a special license.

    • AqidAyman_Altera's avatar
      AqidAyman_Altera
      Icon for Regular Contributor rankRegular Contributor
      1 month ago

      Dear Customer,

      I will continue to monitor this post for the next 5 days. If there are no further inquiries during this period, I will step back and allow the community to assist with any future follow-up questions.

      Thank you for engaging with us!

      Best regards,
      Altera Technical Support