Forum Discussion

fhw72's avatar
fhw72
Icon for New Contributor rankNew Contributor
8 months ago

Using Clocklock+Clockboost on EPF10K100GC503-3DX with Quartus 9.0SP2. How?

Hi! I recently started experimenting with a dinosaur*: EPF10K100GC503-3DX *Yes... I know it's old but I got some and it's "just for show". ;-) In order to use this device I learned that I need to...
Programmable Logic Device
FvM's avatar
FvM
Icon for Super Contributor rankSuper Contributor
8 months ago

Hi,

according to my test, Quartus 9.0 (also 9.0 SP2) doesn't know EPF10K100GC503-3DX, only EPF10K100GC503-3 (same device without PLL feature). altclklock is only supported for EPF10KE family in Quartus 9.0.

Neither Quartus nor MAX+Plus II allow to chose EPF10K100GC503-3 or EPF10K100GC503-3DX in device selection, but if manually set, it's recognized, the latter only for MAX+Plus II.

So it looks like you are stuck with MAX+Plus II to activate clock boost feature for this specific device.

Regards Frank

  • fhw72's avatar
    fhw72
    Icon for New Contributor rankNew Contributor
    8 months ago

    Thanks. Which version of MAX+Plus did you use?
    And: Maybe importing the -3DX project created with MAX+Plus into Quartus would do the trick?