Forum Discussion

Mohammed_Lami's avatar
Mohammed_Lami
Icon for Occasional Contributor rankOccasional Contributor
3 years ago

"TrustZone_Cortex-A9AC6" example does not run normally

Hi, I am struggling in running the ready-examples of the ARM development studio IDE. I demonstrate the "TrustZone_Cortex-A9AC6" example here. I am using the following resources: 1) "ARM Cyclone V...
tehjingy_Altera's avatar
tehjingy_Altera
Icon for Regular Contributor rankRegular Contributor
3 years ago

Hi Mohammed_Lami


Could you give me some more time to research more about this TrustZone as I am not too familiar with it.

I will get back to you as soon as possible.


Regards

Jingyang, Teh


  • Mohammed_Lami's avatar
    Mohammed_Lami
    Icon for Occasional Contributor rankOccasional Contributor
    3 years ago

    Hi @JingyangTeh_Altera

    Please take your time, and thanks for your support

    BTW, the problem happens with other projects that suit my FPGA board (Cyclone V SoC FPGA development kit).

    For example, same error messages appear with the "startup_Cortex-A9_AC6" project.

    Thank you very much

    regards

    Mohammed Lami