Hello, Customer is claiming that he is not able to program the chip: 5M80ZE64I5N DC: 2307, PO: 029-WS903 You can find that he is using a USB Blaster device to do that, Previous part 5M80Z (this one is from 2018 - Foto2) is working with that Software, they are having 17.1 and 22.1 version of this Software, Could you please tell me if Customer is able to program 5M80ZE64I5N (Foto1) using USB Blaster device? Is this chip programable ?? Customer is not able to program that one, Thank you for your assist here,

Hi,Thank you for reaching out. Allow me some time to look into your issue. I shall come back to you with findings.Thank you for your patience.Best Regards,Nazrul Naim

Hello,Sorry for the delay, for this issue can you provide the error message that you have encounter during the configuration of the board. Is this the first time you are encounter the error. and finally have you tried to program with another similar board.Best regards,Nazrul Naim

Hello,I will send this question to the Customer,Please give me a while to response for your question,Thank youBest Regards

Hello,Please find the response from Customer:Message error: no device detected.This is the first time we are encountering this error: we mounted at least400 pcs of this part without any problem in programming them.If we mount parts received (datacode 2307A) on functioning boards, wedetect the message indicated and it's not possible to program them.We detect the same error on all 6 models of boards on which we mount thispart.Please advise next step,Thanks

Hello, Please find the response from Customer:Message error: no device detected.This is the first time we are encountering this error: we mounted at least400 pcs of this part without any problem in programming them.If we mount parts received (datacode 2307A) on functioning boards, wedetect the message indicated and it's not possible to program them.We detect the same error on all 6 models of boards on which we mount thispart. Please advise next step,Thanks

Technical Support Request - 05891252 | Altera Community

18 Replies

Greg6
New Contributor
2 years ago
Hello,
Please find the pic in the attachment,
Thanks
s964006
NazrulNaim_Intel
Regular Contributor
2 years ago
Hello,

Thank you for the response. Before I can proceed with this issue, can I know the current JTAG clock speed in order to debug this issue.

Best regards,
Nazrul Naim
NazrulNaim_Intel
Regular Contributor
2 years ago
Hello,

Is there any update from the customer regarding this issue.

Best Regards,
Nazrul Naim
Greg6
New Contributor
2 years ago
Hello,
Thank you for the reminder,
I sent email to the Customer with chasing one more time,
Wish you great day,
NazrulNaim_Intel
Regular Contributor
2 years ago
Hello,

Is there any update from the customer regarding this issue.

Best Regards,
Nazrul Naim
Greg6
New Contributor
2 years ago
Hello,
I’m sorry Nazrul, I’m still keeping I on it, but there is no response from the Supplier,
Please give the Customer few days, if there will be no response we will close that case,
Thank you
NazrulNaim_Intel
Regular Contributor
2 years ago
Hello,
It seems like there are no response from the customer. For now I will set this case to close-pending, I'm truly sorry for the inconvenience
Best regards,
Nazrul Naim

Forum Discussion

Technical Support Request - 05891252

18 Replies

Recent Discussions

Cyclone-V SCFIFO - adding ECC to M10K/MLAB/Auto memory

Will serialization factor of 6 in LVDS serdes IP be supported in the future on Agilex5?

System PLL of Agliex5 PCIE example design cannot be locked after configuration

JTAG Chain Broken on Agilex 7-I Dev Kit

Request for Cyclone V Pinout File Information