Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
16 years ago

Stratix II Configuration Problem

Hi, We are having some issues configuring a stratix II FPGA. From quartus we can successfully program the flash from Quartus but the FPGA does not always configure correctly when power is applied....
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
15 years ago

Glad to hear you got it fixed chipslinger.

In our case, we actually increased the pull-up on the conf done pin from 10k to 15k to get it working. I thought a lower value would be required but my workmate accidentaly used a 15k resistor. It worked so we left it at that.