Forum Discussion
Altera_Forum
Honored Contributor
Honored ContributorSof2flash
I'm trying to convert .sof file in .flash file for EPCS . I'm using this command: sof2flash --input=.... --output=.... --offset=0x.... --epcs I have this question: if I try to change offset I...
Altera_ForumHonored Contributor
Honored ContributorPlease look at step4 in the wiki.
http://nioswiki.com/guide_to_2c35_cf_with_u-boot You may use u-boot/arch/nios2/cpu/epcs.c, or u-boot spi flash + stmicro + altera_spi. http://nioswiki.com/dasuboot - Hippo
