Occasional Contributor
Occasional ContributorHello
I have Quartus Prime Standard edition 21.1. also my FPGA is Cyclone IV (EP4CGX150CF23C8).
Regarding the Altera Generic Quad SPI Controller 2 look at page 262:
Even EPCQA device (EPCQ128ASI16N) is not mentioned still probably this core need a quad mode of AS.
Also in Platform designer this core is greyed (when 'Show IP for all device families' is marked):
And it simply disappeared when marked 'Show IP for active device family'.
As I understand Cyclone IV is not supporting ASx4 mode.
Thank you
Alex
Frequent ContributorHi @HAlex ,
Generic Serial Flash Interface IP is supported to Cyclone IV. you can find Generic Serial Flash Interface IP user guide in bellow link.
thanks,
Occasional ContributorHello
I wrote above that I have a Quartus Prime Standard edition.
Generic Serial Flash Interface is supported only at Pro edition.
Look your posts above and in the following link:
Thank you
Alex
Frequent ContributorHi
that is correct, that is why in the cyclone v example they use IOWR & IORD. that example link sharing here. once try this one.
link:
Thank you,
Occasional ContributorHello
This example specified for Cypress and Micron flashes and not uses HAL API functions.
So you mean that I can't use Serial Flash Controller II Intel FPGA IP that I defined connected to Intel's flash EPCQ128ASI16N and use HAL API functions and make things in an easier way?
Thank you
Alex
