Forum Discussion
Altera_Forum
Honored Contributor
Honored Contributorrpd file
Hello all, Let me start with an explanation of what we are trying to do here. We have an embedded system with a Freescale processor and a Cyclone II device with an EPCS4 equivalent serial ...
Altera_ForumHonored Contributor
Honored ContributorI have made similar observations before. When I converted a SOF to RPD, the result was not the same as reading the flash back after using JIC. I never managed to get the RPD to actually work.
In the end, I used sof2flash from NIOS EDS to convert the SOF to S-Record. This also did not match the data read back after using JIC, but the FPGA worked fine when the flash was programed with this file.
