Forum Discussion

nskim's avatar
nskim
Icon for New Contributor rankNew Contributor
28 days ago

Agilex 7 R-Tile RBES FPGA – Board Fails to Power On and JTAG Not Detected

1. What is the failure symptom? Please elaborate on the failure symptoms in detail. The FPGA power LED does not turn on, and Quartus fails to detect the JTAG interface. Debugging steps performed: ...
Programmable Logic Device
quality|reliability
FakhrulA_altera's avatar
FakhrulA_altera
Icon for Regular Contributor rankRegular Contributor
1 day ago

Hi nskim,


Thanks for your patience while we checked with our internal team. We’ve confirmed the unit is out of warranty, so we’re unable to proceed with an RMA. Based on the extensive troubleshooting, the device appears to have a hardware fault.

If recovery is still needed, please proceed with a paid repair via your distributor (if applicable).

 

Regards,
Fakhrul

 

FakhrulA_altera's avatar
FakhrulA_altera
Icon for Regular Contributor rankRegular Contributor
11 hours ago

Hi nskim,
 

There are no new updates. As noted earlier, the unit is out of warranty, so we cannot proceed with an RMA. Based on the troubleshooting already done, the device likely has a hardware fault. If recovery is still needed, please arrange a paid repair through your distributor.

At this point, I’ll transition this thread to community support. If you have any new questions, feel free to open a new thread to receive assistance from Altera experts. Otherwise, the community members will continue to help you here.

Thank you for your engagement!

Best regards,
Fakhrul