Forum Discussion
akifh
New Contributor
New ContributorProgramming Altera Max EPM3256AQC208-10N PQFP-208
Hello, I have an Altera Max EPM3256AQC208-10N PQFP-208, the chip is not connected to the card but is single. How can I read the data in this chip and programming data into it? Which devices should I ...
RobertFordNew Contributor
New ContributorThere are two ways to do this, the first is to read it in a MPU with a PLMQ7256-208 adapter in MAXPLUS II or you can go the hard route and solder the VCC, VCCIO, GND and JTAG pins to a breakout board and read it that way with an ALTERA Byte Blaster or similar device in MAXPLUS II.
