Forum Discussion

amolkumar's avatar
amolkumar
Icon for Occasional Contributor rankOccasional Contributor
2 months ago
Solved

PCIe Simulation using Quartus Pro 25.1.1

Hi Team,

PCIe Simulation using Quartus Pro 25.1.1 - F-Tile Avalon® Streaming IP for PCI Express # AGIB022R31A2I1VB

Steps followed for simulation is mentioned in attachment.

Getting error as “ërror design loading”.

Please advise.

Regards

amol

Programmable Logic Device
  • amolkumar's avatar
    amolkumar
    2 months ago

    Hi Wincent,

    I am using Quartus Pro 25.1.1 and questa 25.1.1. Also tried with Quartus Pro 25.3.1 and questa 25.3.1. With both these version getting design loading error. 

    When tried with Quartus 26.1. no errors coming.

    Regards

    amol

5 Replies

    • Wincent_Altera's avatar
      Wincent_Altera
      Icon for Regular Contributor rankRegular Contributor
      2 months ago

      Hi amolkumar ,

      From the fail scenario, I will assume that will be compatible problem between your simulator version --> Quartus version
      Since Quartus v26.1 working well , I would suggest you to go with v26.1 directly

      Regards,

      Wincent_Altera

      • amolkumar's avatar
        amolkumar
        Icon for Occasional Contributor rankOccasional Contributor
        2 months ago

        Hi Wincent,

        I am using Quartus Pro 25.1.1 and questa 25.1.1. Also tried with Quartus Pro 25.3.1 and questa 25.3.1. With both these version getting design loading error. 

        When tried with Quartus 26.1. no errors coming.

        Regards

        amol