Forum Discussion

amolkumar's avatar
amolkumar
Icon for New Contributor rankNew Contributor
27 days ago
Solved

PCIe Simulation using Quartus Pro 25.1.1

Hi Team, PCIe Simulation using Quartus Pro 25.1.1 - F-Tile Avalon® Streaming IP for PCI Express # AGIB022R31A2I1VB Steps followed for simulation is mentioned in attachment. Getting error as “ërror...
Programmable Logic Device
  • amolkumar's avatar
    amolkumar
    25 days ago

    Hi Wincent,

    I am using Quartus Pro 25.1.1 and questa 25.1.1. Also tried with Quartus Pro 25.3.1 and questa 25.3.1. With both these version getting design loading error. 

    When tried with Quartus 26.1. no errors coming.

    Regards

    amol

amolkumar's avatar
amolkumar
Icon for New Contributor rankNew Contributor
27 days ago

Please find transcript.

Wincent_Altera's avatar
Wincent_Altera
Icon for Regular Contributor rankRegular Contributor
26 days ago

Hi amolkumar ,

From the fail scenario, I will assume that will be compatible problem between your simulator version --> Quartus version
Since Quartus v26.1 working well , I would suggest you to go with v26.1 directly

Regards,

Wincent_Altera

  • amolkumar's avatar
    amolkumar
    Icon for New Contributor rankNew Contributor
    25 days ago

    Hi Wincent,

    I am using Quartus Pro 25.1.1 and questa 25.1.1. Also tried with Quartus Pro 25.3.1 and questa 25.3.1. With both these version getting design loading error. 

    When tried with Quartus 26.1. no errors coming.

    Regards

    amol

    • Wincent_Altera's avatar
      Wincent_Altera
      Icon for Regular Contributor rankRegular Contributor
      20 days ago

      Hi amolkumar ,

      I will file an internal ticket for this issue to our team.
      At the meanwhile , please I would strongly suggest to continue with Quartus 26.1.

      Regards,
      Wincent_Altera

    • Wincent_Altera's avatar
      Wincent_Altera
      Icon for Regular Contributor rankRegular Contributor
      13 days ago

      Hi amolkumar ,

      Sorry for missing your message, please continue to use back v26.1.
      Meanwhile, is there anything else I can better assist you ?

      Regards,

      Wincent