Forum Discussion

amolkumar's avatar
amolkumar
Icon for Occasional Contributor rankOccasional Contributor
2 months ago
Solved

PCIe Simulation using Quartus Pro 25.1.1

Hi Team, PCIe Simulation using Quartus Pro 25.1.1 - F-Tile Avalon® Streaming IP for PCI Express # AGIB022R31A2I1VB Steps followed for simulation is mentioned in attachment. Getting error as “ërror...
Programmable Logic Device
  • amolkumar's avatar
    amolkumar
    2 months ago

    Hi Wincent,

    I am using Quartus Pro 25.1.1 and questa 25.1.1. Also tried with Quartus Pro 25.3.1 and questa 25.3.1. With both these version getting design loading error. 

    When tried with Quartus 26.1. no errors coming.

    Regards

    amol

amolkumar's avatar
amolkumar
Icon for Occasional Contributor rankOccasional Contributor
2 months ago

Please find transcript.

  • Wincent_Altera's avatar
    Wincent_Altera
    Icon for Regular Contributor rankRegular Contributor
    2 months ago

    Hi amolkumar ,

    From the fail scenario, I will assume that will be compatible problem between your simulator version --> Quartus version
    Since Quartus v26.1 working well , I would suggest you to go with v26.1 directly

    Regards,

    Wincent_Altera

    • amolkumar's avatar
      amolkumar
      Icon for Occasional Contributor rankOccasional Contributor
      2 months ago

      Hi Wincent,

      I am using Quartus Pro 25.1.1 and questa 25.1.1. Also tried with Quartus Pro 25.3.1 and questa 25.3.1. With both these version getting design loading error. 

      When tried with Quartus 26.1. no errors coming.

      Regards

      amol

      • Wincent_Altera's avatar
        Wincent_Altera
        Icon for Regular Contributor rankRegular Contributor
        1 month ago

        Hi amolkumar ,

        Sorry for missing your message, please continue to use back v26.1.
        Meanwhile, is there anything else I can better assist you ?

        Regards,

        Wincent