Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
16 years ago

NIOS II first time user

Hi I am using NIOS II processor first time. Please help me with following questions. Goal: I am using signalTap to monitor output of my logic and my control values are being hard coded....
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
16 years ago

So are these signals that are not part of the avalon bus? In other words, are these signals that you are going to export out of the SoPC system and connect to other logic? If so, what you do is create a "conduit" interface. Then "export" for the signal type.

Jake