Forum Discussion

xiaren's avatar
xiaren
Icon for New Contributor rankNew Contributor
6 months ago

Need "Installer Package" for Agilex F-Series FPGA Development Kit (ES -3V)

I would like to ask for help on the old development board and the matching Quartus version I recently found the “DK-DEV-AGF014E3ES” ,whichFPGA is AGFB014R24A2E3VR0, but there is no installation packa...
Board Debug
Configuration
WZ2's avatar
WZ2
Icon for Frequent Contributor rankFrequent Contributor
6 months ago

Hi there,

Yes, the “DK-DEV-AGF014E3ES” is no longer supported. However, based on my review, the DK-DEV-AGF014E3ES board is identical to the DK-DEV-AGF014EA series except for the FPGA itself.

Therefore, if your goal is simply to program a design onto the DK-DEV-AGF014E3ES board, you can use the DK-DEV-AGF014EA project and replace the device with the ES version.

Best regards,

WZ


xiaren's avatar
xiaren
Icon for New Contributor rankNew Contributor
5 months ago

Hi, after I use the factory_recovery provided by DK-DEV-AGF014EA to update the power_max10_recovery and ubii_max10_recovery firmware, the whole board can't work properly, for example, the smartVID of the fpga can't get the correct voltage, and the HPS part can't be found on the JTAG .
.Please tell me how to recover it , thank you.