Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
15 years ago

Need help : implement Gigabit Ethernet

Hello, I'm new on this forum, so I hope that I'll be clear with my question. I'm currently working on Cyclone III FPGA Development Kit with the EP3C120F780C7N. For my project I have to etabli...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
15 years ago

i edit my post sorry

so they are both on 255.255.255.0

and i know this :

board : ip 192.168.1.234

Subnet Mask : 255.255.255.0

Gateway : 192.168.0.1

PC : IP : 192.168.1.17

subnet mask : 255.255.255.0

"passerelle par defaut" : 192.168.1.1

DHCP 192.168.1.2

DNS 192.168.1.2

192.168.1.1

"serveur principal wins" 192.168.1.2

i saw that on the cmd window by typing "ipconfig /all" sorry for some expressions but i'm french and don't know the exact translation

and in fact the ip adress and the subnet mask change when i plus my pc to the board and the new ip is 192.168.20.117 and the subnet mask becomes 255.255.0.0 so maybe that's the problem

do i have to fix the same subnet on both, i mean

PC : ip : 198.168.20.117

subnet mask 255.255.0.0

and for my board these for example :

ip 192.168.20.234

SN mask : 255.255.0.0

thanks you