Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
16 years ago

Need help : implement Gigabit Ethernet

Hello, I'm new on this forum, so I hope that I'll be clear with my question. I'm currently working on Cyclone III FPGA Development Kit with the EP3C120F780C7N. For my project I have to etabli...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
16 years ago

The IP addresses of the PC and your board, ANDed with their network masks must match.

As an example if the network mask is 255.255.255.0, 192.168.0.1 and 192.168.0.2 are on the same subnet, but 192.168.0.1 and 192.168.1.2 aren't.

subnet on wikipedia (http://en.wikipedia.org/wiki/subnetwork)