Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
15 years ago

Max+Plus II and ByteBlaster II

Hi, I'm using Max+Plus II software to program/verify MAX 7000 series CPLDs. I am using a ByteBlaster II interface, and I understand that ByteBlaster II support was added as of version 10.22 of ...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
15 years ago

I was able to get it to work by reducing the VCC on my board from 5V to 3.8V or so. Repeated this with 4 or 5 boards. Very strange...