Forum Discussion

Nakaj's avatar
Nakaj
Icon for New Contributor rankNew Contributor
1 year ago

MAX V Exposed pad solder reflow problem-2

Hi

I have an additional question related to my previous question.
Is there a standard for the contact area of the exposed PAD of MAXV QFP64 with the printed circuit board?
For example, 50% or more.

Thank you for your support.

<Previous questiom>

https://community.intel.com/t5/Programmable-Devices/MAX-V-Exposed-pad-solder-reflow-problem/m-p/1646077/emcs_t/S2h8ZW1haWx8dG9waWNfc3Vic2NyaXB0aW9ufE00MDJDWDFERDJHSklZfDE2NDYwNzd8U1VCU0NSSVBUSU9OU3xoSw

Regards

Nakaj

Board Debug

9 Replies

  • AqidAyman_Altera's avatar
    AqidAyman_Altera
    Icon for Regular Contributor rankRegular Contributor
    1 year ago

    Hi Nakaj,


    As I refer to last conversations, you are decided not to do the rework due to customer request.

    May I know the background for this new question?


    Regards,

    Aqid


    • Nakaj's avatar
      Nakaj
      Icon for New Contributor rankNew Contributor
      1 year ago

      Hi Aqid,

      Thank you for your reply.

      We decided not to do rework due to the customer's request,

      but we are currently discussing the quality of the reflow soldering with the customer.

      I posted it here because a customer asked me a question of contact area of exposed PAD.

      Regards,

      Nakaj

    • Nakaj's avatar
      Nakaj
      Icon for New Contributor rankNew Contributor
      1 year ago

      Hi Aqid,

      Rather than the size of the PAD, I would like to know what percentage of the PAD's solder

      needs to be in contact with the board.

      Regards,

      Nakaj

    • Nakaj's avatar
      Nakaj
      Icon for New Contributor rankNew Contributor
      1 year ago

      Hi Aqid,

      Thank you for your reply.

      I’m looking forward to hearing from you regarding your internal team discussion.

      Regards,

      Nakaj

  • AqidAyman_Altera's avatar
    AqidAyman_Altera
    Icon for Regular Contributor rankRegular Contributor
    1 year ago

    Hello Nakaj,


    The answer I provided before is the confirmation from the internal team.


    Regards,

    Aqid


    • Nakaj's avatar
      Nakaj
      Icon for New Contributor rankNew Contributor
      1 year ago

      Hi Aqid,

      Thank you very much.

      OK. noted.

      Regards,

      Nakaj

  • AqidAyman_Altera's avatar
    AqidAyman_Altera
    Icon for Regular Contributor rankRegular Contributor
    11 months ago

    I’m glad that your question has been addressed, I now transition this thread to community support. If you have a new question, Please login to ‘https://supporttickets.intel.com/s/?language=en_US’, view details of the desire request, and post a feed/response within the next 15 days to allow me to continue to support you. After 15 days, this thread will be transitioned to community support. The community users will be able to help you on your follow-up questions.