Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
14 years ago

m25p26

Hi everybody, I have finished a pcb design with a cyclone III Ep3c25q240, it is configurated in AS mode. There are two connector (10 pins), one for the JTAG and the other for the AS. When I dow...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
14 years ago

I have just run the mem test but after filling the start and the end address ( all the ddr memory region and only parts of it) the program stops and nothing appears.

Many thanks for the advice.