Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
14 years ago

m25p26

Hi everybody, I have finished a pcb design with a cyclone III Ep3c25q240, it is configurated in AS mode. There are two connector (10 pins), one for the JTAG and the other for the AS. When I dow...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
14 years ago

i also would start with a simpler design. the Sources and Probes function can be useful during board bring up

you could try to configure the AS device using JTAG with a .jic file