Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
14 years ago

m25p26

Hi everybody, I have finished a pcb design with a cyclone III Ep3c25q240, it is configurated in AS mode. There are two connector (10 pins), one for the JTAG and the other for the AS. When I dow...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
14 years ago

I have seen that instead of a clean external clk of 50 MHz, I have a clk of 1KHz. I'm confused because the circuit apparently seems correct. I attach the schematic, If anyone can help I would be grateful. Thanks.

Also the AS interface doesn`t work.