Forum Discussion

Marco2022's avatar
Marco2022
Icon for New Contributor rankNew Contributor
3 years ago

Jtag- Unable to program FPGA

Good Morning All. I'm new here and would like to ask a question if you don't mind. I'm trying to program a Cyclone III FPGA (see attachment) using ByteBlaster and Quartus Software. The FPGA ...
Marco2022's avatar
Marco2022
Icon for New Contributor rankNew Contributor
3 years ago

Hello, Thanks for taking the time replying to my Question.

My setup is working. I tried with good boards. TCK,TDI and TMS come out from the cable but stop running at one point. TDO is not coming out from FPGA during the process. There no short to ground or short to VCC to any of this signals. There is continuity from the Jtag connector pins to the FPGA for TCK,TDI,TDO and TMS. There not short between any of the signals.

Farabi, Do you have a phone number from Intel I can call you ?