Forum Discussion

XQSHEN's avatar
XQSHEN
Icon for Occasional Contributor rankOccasional Contributor
4 years ago

IO assignment of eMMC

Which one should be used for 1.8V eMMC IO assignment?

IO standard: 1.8V, SSTL-18 class i or class ii, HSTL-18 class i or class ii???

7 Replies

    • XQSHEN's avatar
      XQSHEN
      Icon for Occasional Contributor rankOccasional Contributor
      4 years ago

      eMMC is managed NAND.

      Please see attached datasheet.

      • ak6dn's avatar
        ak6dn
        Icon for Regular Contributor rankRegular Contributor
        4 years ago

        That document is marked WESTERN DIGITAL CONFIDENTIAL. You should NOT be posting it here.

        Intel should NOT read it AND the webmaster should DELETE it ASAP.

        You should be asking Western Digital what signaling levels to use for their device.

  • ak6dn's avatar
    ak6dn
    Icon for Regular Contributor rankRegular Contributor
    4 years ago

    Looks like the confidential data sheet upload has been deleted.

    For your original question I would ask Western Digital for their interface level recommendation.

    • Anonymous's avatar
      Anonymous
      Not applicable
      4 years ago

      @ak6dn I deleted the attachment at your and @XQSHEN request.

      Doc (not an Intel employee or contractor)
      [Maybe Windows 12 will be better]

  • AminT_Intel's avatar
    AminT_Intel
    Icon for Regular Contributor rankRegular Contributor
    4 years ago

    Hello,


    I will close this case since no support will be needed from here.


    Thank you