Forum Discussion

Honored Contributor

15 years ago

Fpga_"PHY" to RJ45 with transformer

Hello guys, I want to connect the Pluto2 fpga board which is trasmitting only to a Pulse RJ45 J006. I will connect the pin_4 to a 100nF Cap on th GND. And i am not sure about what to do ne...

Altera_Forum

Honored Contributor

15 years ago

Here is the Tx + and - after the RJ45 tested on cable.

http://i252.photobucket.com/albums/hh3/unoturbomk2/PlusMInusTX.jpg

And here is the comparison between before RJ45 (magnetics) and after on the Cable of one of the Tx wires.

http://i252.photobucket.com/albums/hh3/unoturbomk2/Beforeandafter.jpg

Forum Discussion

Fpga_"PHY" to RJ45 with transformer

Recent Discussions

JTAG Chain Broken on Agilex 7-I Dev Kit

Quartus Prime Pro 25.1 fatal error during fitter: Windows "Efficiency mode" required

DO-254 Cyclone10LP / CycloneV

Download links not working

Agilex 5 Power