Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
16 years ago

Fpga_"PHY" to RJ45 with transformer

Hello guys, I want to connect the Pluto2 fpga board which is trasmitting only to a Pulse RJ45 J006. I will connect the pin_4 to a 100nF Cap on th GND. And i am not sure about what to do ne...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
16 years ago

I scope the packet after the Pulse RJ45 (Magnetics ).

I am not so experienced but can you see the preable (is e little weird)?

Better Figure on the next post (sorry)