Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
15 years ago

FLASH and SDRAM pins share the same FPGA pin

I found it from the manual, doed that mean we can't apply both the flash and sdram device in SOPC builder? If no, how to deal with it? my board is CYCLONE II EP2C35F672C6 Thanks for any rep...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
15 years ago

I have to correct that :there are FLASH and LAN91C111 device, both of which share the same FPGA pin. So when I apply them in SOPC builder, I can't assign pin location for the pin which share the same pin in FPGA.