Forum Discussion

New Contributor

3 years ago

File for HiLo external SPI flash burner

I have an sof and jic file for a CycloneV device with an MX25L12833FM2I SPI-flash. I need to program the SPI-flash with an external burner (programmer) from HiLo systems. What is the file I need ...

Farabi

Regular Contributor

3 years ago

Hello,

Do you have HiLo programmer link so i can relate? I thought HiLo is a connector for highspeed DDR4/QDR RAM.

link : https://www.isipkg.com/wp-content/uploads/2017/01/ISI_Connector-Overview-HiLo.pdf

regards,

Farabi

MuraliRaj
New Contributor
3 years ago
Hi Farabi:

Thanks for the responses.

That was a coincidence for HiLo

We use the HiLo external burner.

Link is https://www.hilosystems.com/en-gb/product/category/4

We have the AL-200 programmer.

Thanks

Murali

Forum Discussion

File for HiLo external SPI flash burner

Recent Discussions

ASx4 Interface debug in MSEL=111 (JTAG mode)

Avalon-ST configuration with Agilex 3 fails

MAX 10 FPGA Programming Failure via JTAG – nSTATUS & CONFIG_DONE as No Connect

B32A (1591) Package Mechanical Drawing

Request for Cyclone V Pinout File Information