Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
16 years ago

ERROR with programer

Hello everyone, i have trouble with programing of my EP3C16Q240, i have my own board (schematic is in attached PDF). If i use USB blaster, quartus 9.0 says this: Info: Started Programmer operat...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
16 years ago

yes, problem has usb blaster, but i dont know why and where, routes are cca 5cm, pull ups and pull downs are there. I think R at the MSEL are not source of problems, but i try remove it. Its really strange.

Vaclav