EPM3256ATC144-10N and EPM3256ATC144-7N part marking

Question

Hello community

I have a question for the following product: EPM3256ATC144-10N.There are two markings on the product: EPM3256ATC144-10N and EPM3256ATC144-7N are both marked on the part itself.
The ordering code on the MFR label indicates EPM3256ATC144-7N but were ordered as EPM3256ATC144-10N.Since both parts are marked on the part, does this mean the part is EPM3256ATC144-10N or EPM3256ATC144-7N.

nuraiman_m_intel · Accepted Answer

Hi,Thank you for contacting Intel community.For Max3000 dual marking, you may refer to the link below for further information:https://www.intel.com/content/www/us/en/content-details/677788/customer-advisory-adv0306-introduction-of-dual-marking-on-max-3000a-devices.htmlAltera is expanding its MAX 3000A product family to support the industrial temperature grade. Dual marking will enable Altera to provide an industrial grade device for every qualified -7ns commercial grade device currently shipping in production.Thanks.Regards,Aiman

Forum Discussion

EPM3256ATC144-10N and EPM3256ATC144-7N part marking

2 Replies

Recent Discussions

Using Clocklock+Clockboost on EPF10K100GC503-3DX with Quartus 9.0SP2. How?

Asynchronous FIFO and discontinuous write clock

Arria 10: Remote Update Watchdog unpredicted behavior

Estimate the power consumption of the MAX 10 device 10M08SLV81I7G

[USB-Blaster] Detected as "USB-Blaster Variant" on SLES12 – Causing Detection Issues