Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
16 years ago

EP2C8 start-up problem

Hello I have a board with an EP2C8 that displays a strange problem when loaded with a certain application. When I apply power to the device, nothing happens - but the minute I connect my...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
16 years ago

Thank you very much MSchmitt!

I will try this as soon as my configuration outgrows the onboard config. mem (may take a few weeks).

This is not my design, it's a prefab board I got from a chinese manufacturer. Seems they have made a few mistakes with this board. Had to remove a resistor to get JTAG running at all prior to finding this issue.

Anyways, thanks again - will let you know if this solves the problem.