Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
16 years ago

EP2C8 start-up problem

Hello I have a board with an EP2C8 that displays a strange problem when loaded with a certain application. When I apply power to the device, nothing happens - but the minute I connect my...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
16 years ago

--- Quote Start ---

could you please post a schematic of your board that shows everything around the jtag connector and the signals between jtag connector and FPGA (resistors ...)

--- Quote End ---

Sorry for the late reply, I've been a bit under the weather for a cpl days.

This is the schematic:

http :// www . fpga4u . com / estore / support / CII_V6 / schematic / CII_V6.pdf

Sorry about the link, I'm not allowed to post linkes because "To be able to post links or images your post count must be 5 or greater."

Just remove the spaces

Thanks