DE0-Nano - Problem starting on Debian 12

Hi!

I just bought a DE0-Nano board and I would like to start using it using my Debian laptop.

I tried with Quartus II, Quartus Prime 18.1 and Quartus Prime 23.1

I created the file /etc/udev/rules.d/51-usbblaster.rules

with the following lines:

# Intel FPGA Download Cable

SUBSYSTEM=="usb", ATTR{idVendor}=="09fb", ATTR{idProduct}=="6001", MODE="0666"

SUBSYSTEM=="usb", ATTR{idVendor}=="09fb", ATTR{idProduct}=="6002", MODE="0666"

SUBSYSTEM=="usb", ATTR{idVendor}=="09fb", ATTR{idProduct}=="6003", MODE="0666"

# Intel FPGA Download Cable II

SUBSYSTEM=="usb", ATTR{idVendor}=="09fb", ATTR{idProduct}=="6010", MODE="0666"

SUBSYSTEM=="usb", ATTR{idVendor}=="09fb", ATTR{idProduct}=="6810", MODE="0666"

and I think that the program read the USB-blaster

but when I try to start a new project both Quartus Prime 18.1 and 23.1 the fitter doesn't detect any device for Cyclone IV and the devices list is empty.

With Quartus II I can choose the correct device (Cyclone IV - EP4CE22) but when I try to compile it crashes during the compilation.

Any tips?!