Forum Discussion

yong's avatar
yong
Icon for Occasional Contributor rankOccasional Contributor
4 years ago

Cyclone 10 GX Development Kit factory recovery issue

Hello, I am having some issues to perform Cyclone 10 GX Development Kit factory recovery. I follow the instructions to restore the factory build (see the attached readme file from the kit collatera...
AR_A_Intel's avatar
AR_A_Intel
Icon for Super Contributor rankSuper Contributor
4 years ago

Hi

Thanks for your input. May we know, did the dev kit board can program C10 GX successfully in the past or this is new board that can’t program C10 GX at all ?


yong's avatar
yong
Icon for Occasional Contributor rankOccasional Contributor
4 years ago

Hi,

The dev kit board was working. I could program C10 GX successfully. C10 GX was able to be auto detected with Quartus Programmer tool. See the attached screenshot "auto_detect_success.png".

I was testing C10 GX ASx4 configuration from EPCQ Flash. After a test which possibly erased CFI flash attached to MAX10, (EPCQ flash was also erased intentionally for the test), then I am not able to program C10 GX anymore. Quartus Programmer tool can not auto detect C10 GX. Only MAX10 is auto detected. CFI flash attached to MAX10 is also not shown (which was shown before having the issue). See the screenshot "auto_detect_fail.png".

Then I am trying to perform factory recovery and come to the issue I reported on this thread.

You can also find some details on the other thread I posted earlier "Quartus Programmer fails to auto detect device on Cyclone10 GX Dev kit" at the link below:

https://community.intel.com/t5/Programmable-Devices/Quartus-Programmer-fails-to-auto-detect-device-on-Cyclone10-GX/m-p/1276055/emcs_t/S2h8ZW1haWx8dG9waWNfc3Vic2NyaXB0aW9ufEtOVFdNN1lXSDJHWThQfDEyNzYwNTV8U1VCU0NSSVBUSU9OU3xoSw#M79766

  • yong's avatar
    yong
    Icon for Occasional Contributor rankOccasional Contributor
    4 years ago

    Hello.

    Any suggestion to move the debugging forward? Do you need any other information/details from me?

    Thanks!