Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
16 years ago

Configuration / Initialization issues CYCLONE III custom board

Hi, We made our custom board with CYCLONE III FPGA (EP3C16Q240) and memories [SdRam, Nand flash and serial flash (ST's MT25P16)] with only few interfaces [VGA, SD Card and Ethernet] The bo...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
16 years ago

Hi,

Quartus II tool will generate the .sof file. You can convert the .sof file into .jic file.

CRC errors can be enabled in the device and pin options before compiling.

Regards,

Vinod