ContributorHi,
I can access the link and download the example design. Kindly try to access using different browser or clear the browsing data history before downloading the design.
Thanks.
Best regards,
KhaiY
Regular ContributorHi,
I’m glad that your question has been addressed, I now transition this thread to community support. If you have a new question, feel free to open a new thread to get the support from Intel experts. Otherwise, the community users will continue to help you on this thread. Thank you
Best regards,
KhaiY
New ContributorHi @KhaiChein_Y_Intel ,
We have been trying to be able to perform remote system update of Arria 10 GX FPGA
Our setup is as below:
- Arria 10 GX development board connected as a PCIe device to the motherboard of a PC having Intel i5 processor.
- OS installed on host PC : Ubuntu 20.04 64-bit
We have loaded the RSU over pcie example design provided by Intel on the FPGA.
However, when we run the `lspci -v` command on a terminal in the host PC as a root user, we get the below output,
------------------------------------------------------------------------------------------
01:00.0 Unassigned class [ff00]: Altera Corporation Device e001 (rev a5)
Subsystem: Device a106:2484
Flags: fast devsel, IRQ 11
Memory at <unassigned> (64-bit, prefetchable) [disabled]
Capabilities: [50] MSI: Enable- Count=1/4 Maskable- 64bit+
Capabilities: [78] Power Management version 3
Capabilities: [80] Express Endpoint, MSI 00
Capabilities: [100] Virtual Channel
Capabilities: [200] Vendor Specific Information: ID=1172 Rev=0 Len=044 <?>
Capabilities: [300] Secondary PCI Express
Capabilities: [800] Advanced Error Reporting
Kernel modules: altera_cvp
------------------------------------------------------------------------------------------
Would you please give any input(s) with regard to addressing the above issue?
Thanks in advance.
- Sachin
