Forum Discussion

APPU_appu's avatar
APPU_appu
Icon for Occasional Contributor rankOccasional Contributor
5 years ago
Solved

anyone explain the flash programming setting for arria 10, part number 10AX115S2F45I1SG,

i want know flash programming configuration for arria 10 board, part number 10AX115S2F45I1SG,
  • BoonBengT_Altera's avatar
    BoonBengT_Altera
    5 years ago

    Hi @APPU_appu,

    Thank you for posting and sharing the finding in Intel community forum, hope this message find you well and apologies for the delayed in response.
    Per understanding from the previous conversation, please do refer to the following steps here that will bring you through on generating the hex files.
    Hope that helps to clarify.

    Best Wishes
    BB

JohnT_Altera's avatar
JohnT_Altera
Icon for Regular Contributor rankRegular Contributor
5 years ago

Hi,

I do not observed any attachment.

1. May I know if you are using Quartus Programmer to program the jic file?

2. When you mention not booting, is it the FPGA not configured successfully or the Nios II not booting successfully?

  • APPU_appu's avatar
    APPU_appu
    Icon for Occasional Contributor rankOccasional Contributor
    5 years ago

    @JohnT_Intel @BoonBengT_Altera
    just now updated one attachmenet plaese check that one and yes for remote upgrad we used .rpd file which generated form .jic (sof + hex file) . when i tried upgrade flash with .rpd file with the external tool like remote terminal/uart terminal fpga glowing with red led after powering on.