Forum Discussion

APPU_appu's avatar
APPU_appu
Icon for Occasional Contributor rankOccasional Contributor
5 years ago
Solved

anyone explain the flash programming setting for arria 10, part number 10AX115S2F45I1SG,

i want know flash programming configuration for arria 10 board, part number 10AX115S2F45I1SG,
  • BoonBengT_Altera's avatar
    BoonBengT_Altera
    4 years ago

    Hi @APPU_appu,

    Thank you for posting and sharing the finding in Intel community forum, hope this message find you well and apologies for the delayed in response.
    Per understanding from the previous conversation, please do refer to the following steps here that will bring you through on generating the hex files.
    Hope that helps to clarify.

    Best Wishes
    BB

APPU_appu's avatar
APPU_appu
Icon for Occasional Contributor rankOccasional Contributor
5 years ago

Hi @JohnT_Intel

Thanks,

community.intel.com/t5/FPGA-SoC-And-CPLD-Boards-And/Arria-10-gx-remote-upgrade-generic-flash-access-using-flash/m-p/1260855#M19387

what ever projet you give that project is not having nois ip and generic flash and remote ip also.

If i tried upgrade 18.1 quartus it is showing error in the ip upgradation

BoonBengT_Altera's avatar
BoonBengT_Altera
Icon for Moderator rankModerator
4 years ago

Hi @APPU_appu,

Thank you for posting and sharing the finding in Intel community forum, hope this message find you well and apologies for the delayed in response.
Per understanding from the previous conversation, please do refer to the following steps here that will bring you through on generating the hex files.
Hope that helps to clarify.

Best Wishes
BB

  • APPU_appu's avatar
    APPU_appu
    Icon for Occasional Contributor rankOccasional Contributor
    4 years ago

    hi @BoonBengT_Altera , @JohnT_Intel

    here is the new updatation. Remote IP and Nios Ip also added.

    after programing the jic to flash epcql1024 . fpga board it self not boading it showing red error led.

    below i added my project can u please check that one update.