Forum Discussion

AlexKucherov's avatar
AlexKucherov
Icon for New Contributor rankNew Contributor
1 year ago

Agilex5 SmartVID

Hello Intel team We use SmartVID for the Agilex 5 in master mode, The interface between Agilex and voltage regulator is glueless and SDM manage the interface as below I found the following instru...
Board Debug
JohnT_Altera's avatar
JohnT_Altera
Icon for Regular Contributor rankRegular Contributor
1 year ago

Hi Asaf,

Yes, you are correct. As this NVM setting is set only once.

Thanks.

Asaf_Bloch's avatar
Asaf_Bloch
Icon for New Contributor rankNew Contributor
1 year ago

Can the SmartVID work without the Limits setting and without the error Flag?

Thanks

Asaf

  • Asaf_Bloch's avatar
    Asaf_Bloch
    Icon for New Contributor rankNew Contributor
    1 year ago

    Is the NVM configured demand, is applies only when using voltage regulator that are not listed in the GUI by selecting the "Other" option in the Quartus® Prime software? or is it for all regulators?

    Thanks

    Asaf