Forum Discussion
AGFB014R24B2E3V Agilex hanging during Linux boot
Hello,
We brought up a board using AGFB014R24A2E2VR0 Agilex parts, but now that we received new boards with the AGFB014R24B2E3V Agilex, the new boards hang in Linux.
Our board has 4GB of RAM. If I reduce the amount of memory available to Linux (passing in up to 'mem=3584M') then the new boards boot as expected.
If I don't reduce the amount available, during the Linux boot process:
- Issues interpreting the devicetree properties(?)
- Bad page state in the process swapper
I've attached the boot log for the failed boot on the new board with the new Agilex variant.
The linux version used is 5.4.34-lts from the linux-socfpga repo, and the u-boot version used is 2020.07 from the uboot-socfpga repo. The .jic for the board was built using Quartus 21.2 tools.
Any idea what could be causing this? Let me know if you need any other information.
Thanks!
23 Replies
- BoonBengT_Altera
Moderator
Hi @letmein,
Thank you for posting in Intel community forum and hope all is well.
Due to some unforeseen system glitches, which is causing some delayed in the response.However request has reached our attention and we are actively working on it.
Will get back to you as soon as possible.
Thanks you for your patients.Best Wishes
BB - EBERLAZARE_I_Intel
Regular Contributor
Hi,
From the boot logs, it can see that your Uboot booting fine, can you share you Uboot device tree and your Linux device tree?
- EBERLAZARE_I_Intel
Regular Contributor
Hi,
Also, what is the DDR device part number? And also could you share your Quartus project? I want to see the HPS DDR EMIF IP settings.
- letmein
New Contributor
Hi,
The DDR device part number is: Micron MT40A512M16LY-062EAT:E
I've attached the Linux and U-boot device tree files along with the Quartus project Qsys and top level files. If you need more from the Quartus project, I can provide it privately.
Thanks!
- EBERLAZARE_I_Intel
Regular Contributor
Hi,
I will reach out to you via email, thanks.
- letmein
New Contributor
Hi,
Did you already try to reach out? I didn't get an email.
Thanks!
- KennyT_altera
Super Contributor
Hi, Kindly expect some late reply as the owner is taking some leave until next week.
We will check again whether the owner send out the email to you.
- EBERLAZARE_I_Intel
Regular Contributor
Case is communicated via email.
- EBERLAZARE_I_Intel
Regular Contributor
Hi,
Transitioning this thread to community support. If you have a new question, please file a new thread. The community users will be able to help you on your follow-up questions.