Forum Discussion
MK_086
Occasional Contributor
Occasional ContributorAGFB014R24B2E2EV : Evaluation board not booting with NAND Daughter card
Dear Experts,
We have received the new AGFB014R24B2E2EV Eval board, when we powered on the board the HPS Linux booting observed on UART, when Out of box experience daughter card plugged in . When ...
EBERLAZARE_I_Intel
Regular Contributor
Regular ContributorHi,
Try to Set MSEL to QSPI (AS) at Page 30:
https://www.intel.com/content/dam/www/programmable/us/en/pdfs/literature/hb/agilex/ug-ag-config.pdf
MK_086Occasional Contributor
Occasional ContributorHi @EBERLAZARE_I_Intel ,
Yes, the MSEL to QSPI was selected as per the document but still, no prints were observed from the NAND daughter card. Prints were seen with this QSEL change from OOBE card.
Thanks
