Forum Discussion
EBERLAZARE_I_Intel
Regular Contributor
3 years agoHi,
Try to Set MSEL to QSPI (AS) at Page 30:
https://www.intel.com/content/dam/www/programmable/us/en/pdfs/literature/hb/agilex/ug-ag-config.pdf
- MK_0863 years ago
Occasional Contributor
Hi @EBERLAZARE_I_Intel ,
Yes, the MSEL to QSPI was selected as per the document but still, no prints were observed from the NAND daughter card. Prints were seen with this QSEL change from OOBE card.
Thanks